Reactions at interfaces: oxygenation of n-butyl ligands anchored on silica surfaces with methyl(trifluoromethyl)dioxirane

The oxygenation of n-butyl and n-butoxy chains bonded to silica with methyl(trifluoromethyl)dioxirane (1) revealed the ability of the silica matrix to release electron density toward the reacting C(2)-H σ-bond through the Si-C(1) and Si-O(1) σ-bonds connecting the alkyl chain to the surface (silicon β-effect). The silica surface impedes neither the alkyl chain adopting the conformation required for the silicon β-effect nor dioxirane 1 approaching the reactive C(2) methylene group. Reaction regioselectivity is insensitive to changes in the solvation of the reacting system, the location of organic ligands on the silica surface, and the H-bonding character of the silica surface. Reaction rates are faster for those organic ligands either within the silica pores or bonded to hydrophilic silica surfaces, which evidence the enhanced molecular dynamics of confined dioxirane 1 and the impact of surface phenomena on the reaction kinetics. The oxygenation of n-butyl and n-butoxy chains carrying trimethylsilyl, trimethoxysilyl, and tert-butyl groups with dioxirane 1 under homogeneous conditions confirms the electronic effects of the silyl substituents and the consequences of steric hindrance on the reaction rate and regioselectivity. Orthosilicic acid esters react preferentially at the methylene group adjacent to the oxygen atom in clear contrast with the reactivity of the carboxylic or sulfonic acid alkyl esters, which efficiently protect this position toward oxidation with 1.     

Food seeking in spite of harmful consequences is under prefrontal cortical noradrenergic control

Background  

Eating disorders are multifactorial psychiatric disorders. Chronic stressful experiences and caloric restriction are the most powerful triggers of eating disorders in human and animals. Although compulsive behavior is considered to characterize pathological excessive food intake, to our knowledge, no evidence has been reported of continued food seeking/intake despite its possible harmful consequences, an index of compulsive behavior. Brain monoamine transmission is considered to have a key role in vulnerability to eating disorders, and norepinephrine in medial prefrontal cortex has been shown to be critical for food-related motivated behavior.     

Late-stage fluorination of bridged scaffolds: Chemoselective generation of a CHF group at three positions of the bicyclo[3.3.1]nonane system

Monofluorobicyclo[3.3.1]nonane derivatives were prepared by late-stage fluorination, often proceeding with control of stereochemistry. Introduction of fluorine at the 3-, 6- or 7-position was achieved chemoselectively, the bicyclo system being constructed by a tandem one-pot Michael-aldol annulation. The major conformer was deduced for each of the fluorobicyclo compounds prepared, each possessing a unique CF orientation on a common rigid bridged scaffold that can be polysubstituted.     

Hair analysis as a new tool to monitor adherence to long-term therapy to statins

Statins are cholesterol-lowering medications which are widely prescribed as first-line treatment for hyperlipidemia, against high blood cholesterol aimed at reducing the risk of atherosclerotic diseases. Notwithstanding their undoubted efficacy, the needed long-term treatment with these drugs is characterized by a high percentage of dropout. Consequently, an effective tool to verify the patients’ compliance to statin therapy is needed. In this context, the analysis for drugs and drug metabolites in the hair may represent an almost ideal tool because, according to a sound body of forensic toxicological literature, concentrations in the hair matrix reflect the chronic intake of drugs and pharmaceuticals. In this light, in the present study, a novel, specific and sensitive ultra-performance liquid chromatography–tandem mass spectrometry method has been developed to determine six statins and their metabolites (namely atorvastatin, (p)α-OH-atorvastatin-lactone, (o)α-OH-atorvastatin-lactone, rosuvastatin, N-desmethyl rosuvastatin and pravastatin) in human hair. After optimization, the method was successfully validated in terms of selectivity, linearity, sensitivity, precision, accuracy, stability and matrix effect. Moreover, the practical applicability of this method for verifying adherence to statin therapy was assessed by testing samples of hair collected from subjects under long-term therapy with statins.     

Amperometric Detection of Ethanol Vapors by Screen Printed Electrodes Modified by Paper Crowns Soaked with Room Temperature Ionic Liquids

A convenient assembly recently proposed for screen printed gold electrodes (SPEs) suitable for measurements in gaseous samples is here tested for the analysis of the ethanol content in alcoholic drinks. This assembly involves the use of a circular crown of filter paper, soaked in the room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium hydrogen sulfate, which is simply placed upon a disposable screen printed cell, so as to contact the outer edge of the gold disc working electrode, as well as peripheral counter and reference electrodes. The electrical contact between the paper crown soaked in RTIL and the SPE electrode is assured by a gasket and all components are installed in a polylactic acid holder. This assembly provides a portable and disposable electrochemical platform, assembled by the easy immobilization onto a porous and inexpensive supporting material such as paper of a RTIL characterized by profitable electrical conductivity and negligible vapor pressure. The electroanalytical performance of this device was assayed for the flow injection analysis of the ethanol concentration in some real samples of wine and beer and the results obtained are compared with the alcoholic degree reported in the relevant bottle-labels, thus highlighting a substantially satisfactory agreement. Repeatable sharp peaks (RSD=6–8 %) were detected for ethanol over a wide linear range (1–20 % v/v in water) and a detection and quantitation limit of 0.55 % v/v and 1.60 % v/v were inferred for a signal-to-noise ratio of 3 and 10, respectively.     

Toxic and essential metals determination in commercial seafood: Paracentrotus lividus by ICP-MS

Toxic and essential metals content was determined by inductively coupled plasma mass spectrometry in commercial sea urchins samples from the Mediterranean Sea and Pacific Ocean. Results show that Chilean samples have the highest values of Cd, As, Ni, Cr and V; Spanish samples have the maximum Hg content while Sicilian samples have the lowest content of toxic metals. The toxic metal traces were compared with the limits of European Community (EC) No. 1881/2006 for bivalve molluscs. All samples exceed Pb and Cd limit levels; regarding Hg levels, only Sicilian and Sardinian samples have Hg content below the EC limits. The dietary intake of toxic and essential elements was evaluated for an adult. Furthermore, our study highlights a correlation between the toxic elements content and the marine environmental conditions of the places of origin even though only the generic FAO fishing area is specified.     

Oppenauer oxidation of secondary alcohols with 1,1,1-trifluoroacetone as hydride acceptor

1,1,1-Trifluoroacetone (2a) reacts as a hydride-acceptor in the Oppenauer oxidation of secondary alcohols (1) in the presence of diethylethoxyaluminum. The oxidant allows for selective oxidation of secondary alcohols in the presence of primary alcohols.     

Poly(ε-caprolactone) modified by functional groups: Preparation and chemical–physical investigation

Functionalization of polymers is a particular relevant approach in the field of biodegradable polymers, where modifications are often required to allow these materials to replace more conventional, not biodegradable polymers in a wider range of applications. This article will report on functionalization of poly(ε-caprolactone) with unsaturated monomers bearing either anhydride groups (PCL-g-(MA-GMA)) or tertiary amines (PCL-g-DMAEA), obtained through radical grafting in a Brabender mixer. Crystallization kinetics parameters have been determined with several techniques (rheology, optical microscopy and differential scanning calorimetry) and the results obtained are in good agreement. It was observed that the crystallization rate significantly increases in the case of the modified polymers.     

The role of multi-walled carbon nanotubes in shear enhanced crystallization of isotactic poly(1-butene)

The flow-induced crystallization behavior of nanocomposites, containing isotactic poly(1-butene) (PB) and functionalized multi-walled carbon nanotubes (MWNT), was investigated. Three different MWNT concentrations (0.1, 1, 5 wt%) were used to prepare the nanocomposites. Effects of MWNT and shear flow on the crystallization parameters were evaluated separately. Rheological measurements based on oscillatory shear revealed induction time and crystallization half-time at the quiescent state, where both parameters exhibited the nucleating effect of MWNT on PB. Rheological measurements based on steady-state shear flow and short-time shear flow revealed the evolution of molecular orientation, which was studied in both PB and its nanocomposites. A small increase in crystallization kinetic was recorded in PB under shear having moderate values of the Weissenberg (We) number. On the other hand, a dramatic synergistic effect of MWNT and shear was detected under the same shear conditions for nanocomposites. The optical microscopic images exhibited a clear transition from isotropic to row-like morphology in the case of nanocomposites under shear.     

Computer-aided molecular design of asymmetric pyrazole derivatives with exceptional enantioselective recognition toward the Chiralcel OJ-H stationary phase

A computer-aided design of novel asymmetric pyrazoles with improved enantioselective properties was performed by docking experiments starting from a model of Chiralcel OJ chiral in the stationary phase. Synthesis and HPLC experiments confirmed the theoretical prediction and led to a detailed investigation of the enantioselective recognition process. For the first time, looking at the time spent by each enantiomer in contact with the CSP during long molecular dynamic simulations, the experimental analytical trend has been reproduced.